SAAB 900 9-3 9-5 9000 B204 B205 B234 B235 Balance Shaft Delete Kit
Choice of FREE Solder/crimp fit Wiring Plug or Optional Wiring Adapter to fit stock loom (no soldering or cutting etc needed) Lifetime Warranty Best quality available!! Backed up by a lifetime warranty! This is our premium 3 bar map sensor, available in the 'TRUST' Black FREE POSTAGE
Studs and Nuts meticulously sourced by us
We supply all Genuine Saab o rings in photo FREE UK POST Select from drop down box
Custom Made Saab 900 9-3 9-5 B204 B205 B235 T25 TD-04 GT-17 Turbo Stock Position Stainless Steel Tubular Manifold We were the first in the world to supply a tubular manifold to fit the SAAB 900NG 9-3 and 9-5 with stock turbo in the stock position Still arguably the best performance, best looking tubular manifold to suit Fits: Mitsubishi TD-04 Garrett T25...
Lifetime Warranty
We Ship Worldwide
Banner
Payment Methods
Chat With Us
FAQ's
Custom Made
Saab 900 9-3 9-5 B204 B205 B235 T25 TD-04 GT-17 Turbo Stock Position Stainless Steel Tubular Manifold
We were the first in the world to supply a tubular manifold to fit the SAAB 900NG 9-3 and 9-5 with stock turbo in the stock position
Still arguably the best performance, best looking tubular manifold to suit
Fits: Mitsubishi TD-04 Garrett T25 (900NG) Garrett GT17 (9-3 900NG 9-5)
Stock Fan Stock and aftermarket downpipes
Stock Oil and water lines
Stock Power steering and bracket
Stock and aftermarket cobra pipes Turbo is in the exact same position as OEM No modifications are needed!
Strongly recommended over 300HP!
Our tubular exhaust manifold is crafted with premium quality materials.
Allowing a lot better flow of exhaust gases to the turbo, resulting in a significant improvement in spool-up.
Reduced back pressure also allows higher top-end when fine tuning boost and ignition maps.
We recommend using a 3 inch downpipe Material of tubes:
Will fit: Saab 900 - 1994-1998 - all versions with 2.0 turbo Petrol engines
Saab 9-3 - 1998-2002 - all versions with 2.0 and 2.3 turbo Petrol engines (Trionic5 and Trionic7)
Saab 9-5 - 1998-2009 - all versions with 2.0 and 2.3 turbo Petrol engines (Trionic5 and Trionic7)
All flanges are ground before and after fabrication to ensure flatness and perfect seal properties
Collectors welded inside and out for ultimate strength
Ports also welded inside for a smooth transition
304L Grade with material certificates 1.25" sch 10 pipe heat treated for ultimate stability and caters for up to approx. 700bhp
Design optimised for high gas flow to release more horsepower. Length and geometry of tubes are also tuned for equal cylinder and exhaust gas temperatures.
Custom Made SAAB 900NG 9-3 9-5 9000 B204 B234 B205 B235 2.0 2.3 Stainless Side Mount / Side Winder Gearbox Tubular Manifold Will fit all SAAB B2*4 B2*5 engines Ultra Compact, just 190mm from head flange Limited edition so Limited numbers available! Fully designed and tested for 100% performance in mind. Arguably the best side gearbox mount for SAAB...
Garrett Turbo Adjustable Actuator Brackets GTX G25 GT3071 GT3076 GT28 GT2871 GT2876
Custom Made Saab Classic 900 Stock Position Stainless Steel Tubular Manifold WE CAN ALSO MAKE IT WITH A T2 FLANGE (SELECT IN DROP DOWN BOX) EXTERNAL WASTEGATE PORT ALSO AVAILABLE
Solid Copper Turbo Gasket Garrett Holset Borg Warner Precision T3 High Performance Designed and made in the UK
Solid Copper Turbo Gasket Garrett Holset Borg Warner Precision T2 High Performance Designed and made in the UK
Custom Made Trust Series
SAAB 900 9-3 9-5 B204 B234 B205 B235 Stainless Exhaust Tubular Manifold Turbo Compressor Inlet is Timing Side Fits B204 (900NG & 9-3) B206 B205 B235 Fits: Stock Fan** Stock Power steering and bracket Perfectly in the engine bay (up to Garrett GT35/ Holset hx/hy35 frame turbo) Expected modifications: Exhaust Down pipe Turbo Oil and water Lines Inter...
Custom Made Saab GT28 GT30 GT35 / Holset HY-35 Stainless Tubular Manifold 9000 B2*4 Engines Your Choice of Turbo Flange and Wastegate flange
Custom Made SAAB 900NG 9-3 9-5 9000 B204 B234 B205 B235 2.0 2.3 Stainless Top Mount Tubular Manifold Will fit all SAAB B2*4 B2*5 engines
SAAB 900 9-3 9-5 B204 B234 B205 B235 RWD Top Mount Stainless Exhaust Tubular Manifold Turbo Compressor Inlet is Timing Side Fits B204 (900NG & 9-3) B206 B205 B235 (REAR WHEEL DRIVE/LONGITUDINAL ENGINE CONVERSIONS) Fits: Stock Fan** Stock Power steering and bracket Perfectly in the engine bay (up to Garrett GT35/ Holset hx/hy35 frame turbo) Expected...
Studs and Nuts meticulously sourced by us
Custom Made
Saab 900 9-3 9-5 B204 B205 B235 T25 TD-04 GT-17 Turbo Stock Position Stainless Steel Tubular Manifold
We were the first in the world to supply a tubular manifold to fit the SAAB 900NG 9-3 and 9-5 with stock turbo in the stock position
Still arguably the best performance, best looking tubular manifold to suit
Fits: Mitsubishi TD-04 Garrett T25 (900NG) Garrett GT17 (9-3 900NG 9-5)
Stock Fan Stock and aftermarket downpipes
Stock Oil and water lines
Stock Power steering and bracket
Stock and aftermarket cobra pipes Turbo is in the exact same position as OEM No modifications are needed!
Strongly recommended over 300HP!
Our tubular exhaust manifold is crafted with premium quality materials.
Allowing a lot better flow of exhaust gases to the turbo, resulting in a significant improvement in spool-up.
Reduced back pressure also allows higher top-end when fine tuning boost and ignition maps.
We recommend using a 3 inch downpipe Material of tubes:
Will fit: Saab 900 - 1994-1998 - all versions with 2.0 turbo Petrol engines
Saab 9-3 - 1998-2002 - all versions with 2.0 and 2.3 turbo Petrol engines (Trionic5 and Trionic7)
Saab 9-5 - 1998-2009 - all versions with 2.0 and 2.3 turbo Petrol engines (Trionic5 and Trionic7)
