Healtech SpeedoHealer SH-V4 + SH-U01 Universal

New product

For use with the following motorcycles (not complete list):

More details

£ 84.95

More info

APRILIA RS125, RS250, RSV Mille, Dorsoduro, Shiver, Tuono, Falco, etc.. 
DUCATI, ALL models with ABS
HARLEY Davidson VRSC family [e.g. V-Rod] (2002-2013), 
ALL models manufactured since 2007 
HONDA CB1100 (2010-2013), Crossrunner (2011-2013), Crosstourer (2012-2013),
VFR800X (2011-2013), VFR1200 (2010-2013) 
KAWASAKI ZX-6R (2005-2006), ZX-6RR (2005-2006)
SUZUKI VL1500 (1998-2004), LT-A700X KingQuad [ATV] (2005-2007), LT-A750X
KingQuad [ATV] (2008-2011)
YAMAHA FZ6 [ABS] (2006-2012), FJR1300 [ABS] (2004-2013), XJ6 [ABS] (2009-2013), 
TDM900 [ABS] (2004-2013), VMAX (2009-2013) 
VOXAN Cafe-Racer, Street Scrambler, Scrambler, Black Magic, Roadster, etc.. 
Also fits other vehicles (motorcycles, cars, vans, ATVs, snowmobiles) with 3-wire speed 
sensor and 2-wire ground switch sensor.
Improved User Interface
Easier to program, review and update the stored parameters.

 Extended calibration range

-99.9% to +9999.9% in steps of 0.1% Which means the signal can be adjusted from 1/1000 to x100, in increments of 0.001. This range is efficient even for the most radical gearing changes and suitable for all kind of custom applications as well.

 Factory look
Black, high quality, flame retardant and shielded wiring harness – blends in with the other cables.

 Detachable Remote button
SpeedoHealer comes with a detachable remote button with rugged wiring as standard for the Top Speed Recall feature.

 Improved connector layout
The unit takes less space with the wiring harness connected.

 Dual-Bank Memory
Store two independent calibration values and switching between them by the press of a button. There is a clear, visual confirmation of the active bank and value in use. Useful for road & track setting when changing gearing or running different sized wheels/tires. Also, easy to bypass the speed limiter when on the track.

 Display unit conversion
Change from KM/H to MPH and vice versa by the press of a button.

 Interactive test mode
Confirm installation before take off.

 Compact dimensions
30% smaller and lighter unit compared to SHv3. Full SMD design. The smallest and lightest calibrator ever built.

 Wide operating voltage range
Works from as low as 3V supply voltage up to 19V. Means even easier installation for all Yamaha bikes and some other models. Reduced power consumption + auto stand-by.

 High-speed CPU
32-bit processing ensures high accuracy and immediate response to the input signal (no lag).

 Robust design
100% weatherproof. Every unit is fully tested, guaranteed to work. All leads are protected against reverse voltage, short circuits and high energy transients.